Toyota Sienna Service Manual: Throttle body

Installation

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side)  Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control v ...

Components

...

Other materials:

Checking monitor status
The purpose of the monitor result (mode 06) is to allow access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalyst, evaporative emission (EVAP) and thermostat. The monitor result allows the OBD II sc ...

Weight limits
The gross trailer weight must never exceed 3500 lb. (1588 kg).* The gross combination weight must never exceed the GCWR described below. 2WD models: 8900 lb. (4037 kg)* AWD models: 8990 lb. (4078 kg)* The gross vehicle weight must never exceed the GVWR indicated on the Certifi ...

Evap monitor (key-off type)
(a) Preconditions The monitor will not run unless: The fuel tank is less than 90% full. The altitude is less than 8000 ft (2450 m). The vehicle is stationary. The engine coolant temperature is between 4.4°C and 35°C (40°F and 95°F). The intake air temperature is between 4.4°C and ...