Toyota RAV4 manuals

Toyota Sienna Service Manual: Touch Panel Switch does not Function

INSPECTION PROCEDURE

1 CHECK TOUCH PANEL

  1. Check for foreign matter on the display.

OK: The display is clean

2 CHECK TOUCH SWITCH (DISPLAY CHECK MODE)

CHECK TOUCH SWITCH (DISPLAY CHECK MODE)

  1. Enter the "Display Check" mode (Touch Switch Check).
  2.  Touch the display in the area where the switch malfunction occurs.

OK: A "+" mark appears at the touched position.

REPLACE RADIO AND NAVIGATION ASSEMBLY

Panel Switches do not Function
INSPECTION PROCEDURE 1 CHECK PANEL SWITCH Check for foreign matter around the switches that might prevent operation. OK: No foreign matter is found 2 CHECK PANEL SWITCH (DISPLAY CHECK MODE ...

Display Panel does not Open, Tilt or Tilts Improperly
INSPECTION PROCEDURE 1 CHECK RADIO AND NAVIGATION ASSEMBLY Check for foreign matter or obstructions caught in the moving parts of the panel. OK: No obstruction or foreign matter found. ...

Other materials:

Meter panel light control
The brightness of the meter panel lights can be adjusted. Pressing the button will adjust the brightness of the meter panel lights. The brightness level of the meters when the surroundings are bright (day mode) and dark (night mode) can be adjusted individually. However, when in day ...

Removal
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE ROOF HEADLINING ASSEMBLY HINT: Refer to the instructions for REMOVAL of the ROOF HEADLINING (See page IR-6). 3. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY (a) Remove the bolt. (b) Disconnect the connector and remove the ...

Installation
1. INSTALL 3 POINT TYPE NO. 2 REAR SEAT BELT ASSEMBLY  Check the degree of tilt when the belt begins to lock the ELR. Check that the belt does not lock within 15 of tilt in all directions but that the belt locks with over 45 of tilt, when gently moving the retractor. If ...

В© 2011-2022 Copyright www.tsienna.net