Toyota Sienna 2010-2024 Owners Manual: Touch screen gestures

Toyota Sienna 2010-2024 Owners Manual / Audio system / Basic Operations / Audio system / Touch screen gestures

Operations are performed by touching the screen directly with your finger.

Operation method	Outline	Main use
	Touch Quickly touch and release once.	Changing and selecting various settings.
	Drag* Touch the screen with your finger, and move the screen to the desired position.	Scrolling the lists, using scroll bar in lists, etc
	Flick* Quickly move the screen by flicking with your finger.	Moving the list screen (list screen limit).

*: The above operations may not be performed on all screens. Also if the vehicle reaches a high altitude, it may become hard to perform above functions.

When using the touch screen

If the screen is cold, the display may be dark, or the system may seem to be operating slightly slower than normal.
The screen may seem dark and hard to see when viewed through sunglasses.
Change your angle of viewing, adjust the display on the “Display Settings” screen or remove your sunglasses.
Flick operations may not be performed smoothly in high altitudes.

NOTICE

To avoid damaging the touch screen

To prevent damaging the screen, lightly touch the screen buttons with your finger.
Do not use objects other than your finger to touch the screen.
Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen.

Audio system operation buttons

“AUDIO” button Display the “Select Audio Source” screen or audio top screen. “SETUP” button Press this button to customize the function settings. “CAR” button Pr ...

Steering wheel audio switches

Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual p ...

Other materials:

Diagnosis system
1. DIAGNOSIS FUNCTION The diagnosis function makes the light and the multi-information display come on, and the CRUISE main indicator light blink as shown in the illustration. When a malfunction occurs in the dynamic laser cruise control system, the DTCs are stored in the ECM ...

Reassembly
1. INSTALL LIGHT CONTROL ECU (DISCHARGE HEADLIGHT) Install a new headlight leveling motor base packing. Install the headlight leveling motor assembly as shown in the illustration. Connect the connector with the claw Install the light control ECU with the 2 ...

Short in Front Passenger Side Squib Circuit
DTC B0105/53 Short in Front Passenger Side Squib Circuit DESCRIPTION The front passenger side squib circuit consists of the center airbag sensor assembly and the front passenger airbag assembly. The circuit instructs the SRS to deploy when deployment conditions are met. DTC B0105/53 is re ...