Toyota Sienna Service Manual: Transfer case oil seal

Reassembly

1. INSTALL TRANSFER DRIVEN PINION REAR BEARING (a) Using SST(s) and a press, install the transfer driven pinion rear bearing outer race to the transfer case. SST 09950-60010 (09951-00620), 09950-70 ...

Removal

1. REMOVE ENGINE AND TRANSAXLE HINT: (See page EM-26) 2. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER HINT: (See page AX-164) 3. REMOVE TRANSFER ASSEMBLY HINT: (See page TF-8) 4. REMOVE CTR D ...

Other materials:

Data list / active test
1. READ DATA LIST HINT: Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be disco ...

Release Actuator Circuit
DESCRIPTION The fold seat control ECU receives a switch operation signal from the fold seat switch and activates the release actuator. The release actuator releases the lock of the stowed seat based on a drive voltage received from the ECU. WIRING DIAGRAM INSPECTION PROCEDURE 1 INSPECT ...

Sliding door child-protector locks
The sliding door cannot be opened by the inside door handle and the second seat sliding door switch when the lock is set. Unlock Lock These locks can be set to prevent children from opening the sliding doors. Push down on each sliding door switch to lock that sliding door. The p ...