Toyota Sienna Service Manual: Transfer unit
COMPONENTS
Installation
1. INSTALL TRANSFER ASSEMBLY
(a) Apply sealant 1281 to the transaxle assembly and
transfer assembly in continuous beaded from of 1.2
mm diameter as shown in the illustration.
NOTICE:
Wipe ...
Disassembly
1. REMOVE TRANSFER COVER GASKET
(a) Remove the transfer gasket from the transfer
assembly.
2. REMOVE TRANSFER CASE BREATHER PLUG
(a) Using a screwdriver and a hammer, remove the
transfer ...
Other materials:
Black Screen
INSPECTION PROCEDURE
1 CHECK DISPLAY SETTING
Check that the display is not in "Screen OFF" mode.
OK:
The display setting is not in "Screen OFF" mode.
2 CHECK IMAGE QUALITY SETTING
Check that the screen color quality can be set.
OK:
Setting is possible.
PRESS PA ...
Manual Up / Down and Auto Down Function does not Operate on
Driver Side
DESCRIPTION
If the manual UP/DOWN function does not operate, no power may be supplied to
the power window
master switch or the power window motor. The power window master switch itself
or the wire harness may
be malfunctioning.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 INSPECT FUSE (P/W)
...
Inspection
1. INSPECT BRAKE VACUUM CHECK VALVE ASSEMBLY
(a) Check the vacuum check valve.
(1) Slide the clip and disconnect the vacuum hose.
(2) Remove the vacuum check valve.
(3) Check that there is ventilation from the booster
to the engine, and no ventilation from the
engine to the booster.
...
