Toyota Sienna Service Manual: Underdrive planetary gear

Disassembly

1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD HINT: (See page AX-260) 2. REMOVE FRONT PLANETARY GEAR NUT (a) Using SST, loosen the staked part of the lock nut. SST 09930-00010 (09931-00010, ...

Other materials:

Removal and installation of engine intake parts
REMOVAL AND INSTALLATION OF ENGINE INTAKE PARTS (a) If any metal particles enter inlet system parts, this may damage the engine. (b) When removing and installing inlet system parts, cover the openings of the removed parts and engine openings. Use gummed tape or other suitable materials ...

Parking brake
Operating instructions To set the parking brake, fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.) Usage in winter time NOTICEBefore driving Fully release ...

Problem symptoms table
If there are no DTCs output but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting page. NOTICE: When replacing the brake actuator assembly, sensor, etc., turn the ignition switch off. HINT: ...