Toyota RAV4 manuals

Toyota Sienna 2010-2024 Owners Manual: Vehicle interior

Items

Check points

Accelerator pedal
  • The accelerator pedal should move smoothly (without uneven pedal effort or catching).
Automatic transaxle “Park” mechanism
  • When parked on a slope with the shift lever in P, is the vehicle securely stopped?
Brake pedal
  • Does the brake pedal move smoothly?
  • Does the brake pedal have appropriate clearance from the floor?
  • Does the brake pedal have the correct amount of free play?
Brakes
  • The vehicle should not pull to one side when the brakes are applied.
  • The brakes should work effectively.
  • The brake pedal should not feel spongy.
  • The brake pedal should not get too close to the floor when the brakes are applied.
Head restraints
  • Do the head restraints move smoothly and lock securely?
Indicators/buzzers
  • Do the indicators and buzzers function properly?
Lights
  • Do all the lights come on?
  • Are the headlights aimed correctly?
Parking brake
  • Does the parking brake lever or pedal move smoothly?
  • When parked on a slope with the parking brake on, is the vehicle securely stopped?
Seat belts
  • Do the seat belts operate smoothly?
  • The seat belts should not be damaged.
Seats
  • Do the seat controls operate properly?
Steering wheel
  • Does the steering wheel rotate smoothly?
  • Does the steering wheel have the correct amount of free play?
  • There should not be any strange sounds coming from the steering wheel.
Engine compartment
Items Check points Battery Check connections Brake fluid Is the brake fluid at the correct level? Engine coolant Is the engine coolant at the corr ...

Vehicle exterior
Items Check points Doors Do the doors operate smoothly? Engine hood Does the engine hood lock system work properly? ...

Other materials:

Weight limits
The gross trailer weight must never exceed 3500 lb. (1588 kg).* The gross combination weight must never exceed the GCWR described below. 2WD models: 8900 lb. (4037 kg)* AWD models: 8990 lb. (4078 kg)* The gross vehicle weight must never exceed the GVWR indicated on the Certifi ...

Removal
1. REMOVE OUTSIDE MOULDING Put protective tape around the outside moulding. Using a heat light, heat the moulding between 40 to 60 C (104 to 140 F). NOTICE: Do not heat the moulding excessively. Tie both piano wire ends to a wooden block or a similar object. Cut off the tape by ...

Unlock warning switch
INSPECTION 1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY  Remove the unlock warning switch assembly .  Measure the resistance according to the value(s) in the table below. Standard resistance ...

© 2011-2024 Copyright www.tsienna.net