Replace the battery with a new one if it is depleted.
You will need the following items:
Replacing the battery
Insert a new battery with the “+” terminal facing up.
To prevent damage to the key, cover the tip of the screwdriver with a rag.
Insert a new battery with the “+” terminal facing up.
Use a CR2032 lithium battery
If the key battery is depleted
The following symptoms may occur.
WARNING Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. |
NOTICE For normal operation after replacing the battery Observe the following precautions to prevent accidents.
|
Data list / active test
1. READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows
the values or states of switches, sensors, actuators and
other items to be read without removing any parts. This
non-intrusive inspection can be very useful because
intermittent conditions or signals may be disco ...
Parking Brake Switch Circuit
DESCRIPTION
This circuit is from the parking brake switch to the radio and navigation
assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 CHECK BRAKE WARNING LIGHT
Check that the brake warning light comes on when the
parking brake is applied and goes off when it is released.
OK:
The ...
Panel Switch Error/ Touch Switch Error
DTC 21-10 Panel Switch Error
DTC 21-11 Touch Switch Error
DTC 23-10 Panel Switch Error
DTC 23-11 Touch Switch Error
DTC 24-10 Panel Switch Error
DTC 24-11 Touch Switch Error
DTC 25-10 Panel Switch Error
DTC 25-11 Touch Switch Error
DESCRIPTION
INSPE ...