Toyota Sienna Service Manual: Wrong Disc/ Disc cannot be Read

Toyota Sienna Service Manual / Navigation / Navigation system / Diagnostic trouble code chart / Wrong Disc/ Disc cannot be Read

DTC 44-41 Wrong Disc

DTC 44-42 Disc cannot be Read

DESCRIPTION

DTC No.	DTC Detection Condition	Trouble Area
44-41	An unsuitable disc is inserted	DVD Television display assembly
44-42	The disc cannot be read.	DVD Television display assembly

INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs

1 CHECK DISC

CHECK DISC

Check that the disc is not deformed or cracked.

OK: No deformation or cracks on the disc.

2 DISC CLEANING

DISC CLEANING

Disc cleaning

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE: Do not use a conventional record cleaner or antistatic preservative.

3 CLEAR DTC

Clear the DTC

4 RECHECK DTC

Recheck DTCs and check if the same trouble occurs again.

OK: Malfunction disappears

5 REPLACE DISC WITH ANOTHER AND RECHECK

Replace the disc with another and recheck.

Replace the disc with another normal one.
Clear the DTCs.
Recheck for DTCs and check if the same trouble occurs again.

OK: Malfunction disappears.

END

DVD Player Mechanical Error/ DVD Insertion and Ejection Error/ DVD Reading Abnormal

DTC 44-10 DVD Player Mechanical Error DTC 44-11 DVD Insertion and Ejection Error DTC 44-12 DVD Reading Abnormal DESCRIPTION TC No. DTC Detection Condition Trouble Area ...

DVD-ROM Abnormal

DVD-ROM Abnormal DESCRIPTION DTC No. DTC Detection Condition Trouble Area 44-43 DVD-ROM operation is abnormal. DVD Television display a ...

Other materials:

Jam Protection Function Activates During Power Slide Door RH Operation
DESCRIPTION It may be caused by ill-fitting slide door, faulty touch sensor or faulty pulse sensor. The power slide door ECU activates the slide motor to open / close the power slide door, thus controlling the power slide door operation. For jam and foreign object detect ...

Removal
1. DISCHARGE FUEL SYSTEM PRESSURE HINT: See page FU-1. 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 3. REMOVE NO. 1 ENGINE UNDER COVER 4. DRAIN ENGINE COOLANT (See page CO-6) 5. REMOVE FRONT WIPER ARM HEAD CAP (See page WW-4) 6. REMOVE FRONT WIPER ARM RH (See page WW-4) 7. REMOVE FRO ...

Using the rear view monitor system
Screen description The rear view monitor system screen will be displayed if the shift lever is shifted to R while the engine switch is in the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system). Vehicle width guide line The lin ...