Toyota RAV4 manuals

Toyota Sienna 2010-2018 Owners Manual: Bluetooth

When using the Bluetooth® audio system

When using the hands-free system

Conditions under which the system will not operate

Bluetooth® antenna

The antenna is built into the display.

If the Bluetooth® device is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deteriorate.

Battery charge/signal status

When using the Bluetooth® audio and hands-free system at the same time

The following problems may occur.

About the contact in this system

The following data is stored for every registered cellular phone. When another phone is connecting, you cannot read the registered data.

When removing a Bluetooth® phone from the system, the above-mentioned data is also deleted.

About Bluetooth®

Toyota Sienna. About Bluetooth


The Bluetooth® word mark and logos are registered trademarks owned Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners.

Compatible models

The Bluetooth® audio system supports portable audio players with the following specifications

However, please note that some functions may be limited depending on the type of portable audio player connected.

The hands-free system supports cellular phones with the following specifications.

If the cellular phone does not support HFP, you cannot register it with the hands-free system. OPP, PBAP or MAP services must be selected individually.

Certifications for the Bluetooth (caution)

FCC ID: AJDK068

NOTE: This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body in normal use position.

FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Co-Location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

IC: 775E-K068

CAUTION: Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body in normal use position.

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps en utilisation normale.

The Bluetooth® antenna cannot be removed (or replaced) by user.

L’antenne Bluetooth® ne peut pas être supprimé (ou remplacé) par l’utilisateur.

Reconnecting the portable audio player

If the portable audio player is disconnected due to poor reception, the system automatically reconnects the portable audio player.

If you have switched off the portable audio player yourself, follow the instructions below to reconnect:

When you sell your car

Be sure to delete your personal data.

WARNING

While driving

Do not operate the portable audio player, cellular phone or connect a device to the Bluetooth® system.

Caution regarding interference with electronic devices

  • Your audio unit is fitted with Bluetooth® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth® antennas. The radio waves may affect the operation of such devices.
  • Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

NOTICE

When leaving the vehicle

Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.

What to do if... (Troubleshooting)
If there is a problem with the hands-free system or a Bluetooth® device, first check the table below. When using the hands-free system with a Bluetooth® device The hands-free syst ...

Using the voice command system
Voice command system The voice command system enables the hands-free system to be operated using voice commands. ...

Other materials:

Reassembly
1. INSTALL OVERDRIVE DIRECT CLUTCH O-RING (a) Coat an O-ring with ATF, and install it to the direct clutch drum. NOTICE: Make sure that the O-ring is not twisted or pinched when it is installed. 2. INSTALL OVERDRIVE DIRECT CLUTCH DRUM SUBASSEMBLY (a) Coat the direct clutch drum with A ...

Reassembly
1. INSTALL COOLER DRYER (a) Using needle nose pliers, install the cooler dryer. (b) Install a new O-ring on the cap. (c) Sufficiently apply compressor oil to the fitting surfaces of the O-ring and the cap. Compressor oil: ND-OIL 8 or equivalent (d) Using a hexagon wrench 14 mm ( ...

Back Sonar Sensor LH Circuit
DESCRIPTION An ultrasonic sensor consists of a sensor portion that transmits and receives ultrasonic waves and a preamplifier that amplifies them. The ultrasonic sensor outputs the ultrasonic waves and sends the received signals to the clearance warning ECU. WIRING DIAGRAM INSPECTION PR ...

© 2011-2018 Copyright www.tsienna.net