Toyota Sienna 2010-2026 Owners Manual: Adjusting the seat belt shoulder anchor height (front and second outside Tip-up seats)
- Push the seat belt shoulder anchor down while pressing the release button.
- Push the seat belt shoulder
anchor up.
Move the height adjuster up and down as needed until you hear a click.
Releasing and stowing the seat belt (for the third center seat)
To release plate “B”, press the
release button on buckle “B”.
To release plate “A”, insert the
key or plate “B” into
the hole on buckle “A”.
Retract the be ...
Seat belt pretensioners (front seats)
The pretensioners help the seat
belt to quickly restrain the occupant
by retracting the seat belt
when the vehicle is subjected to
certain types of severe frontal or
side collision or a vehic ...
Other materials:
Removal
HINT:
For the parking brake cable assembly No. 2, perform the
same procedure to the parking brake cable assembly No. 3.
1. REMOVE REAR WHEEL
2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for
Drum Type) (See page BR-37)
3. REMOVE FRONT BRAKE SHOE (for Drum Type) (See
page BR-37)
4. REMOVE REAR BRAK ...
Removal
CAUTION:
Wear safety gloves, because the sharp surfaces of the
seatback frame and seat adjuster may injure your
hand.
Work must be started more than 90 seconds after the
ignition switch is turned to the LOCK position and the
negative (-) terminal cable is disconnected from ...
DTC check / clear
1. CHECK DTC (USING INTELLIGENT TESTER)
Checking DTCs.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Read DTCs by following the prompts on the
tester screen.
HINT:
Refer to the intelligent tester operator's manual
for further deta ...
