Toyota Sienna Service Manual: Headlight dimmer relay
ON-VEHICLE INSPECTION
1. HEADLIGHT DAY DIM LIGHT RELAY
- Inspect relay resistance.
Resistance
Daytime running light relay
ON-VEHICLE INSPECTION
1. RUNNING LIGHT RELAY
Inspect relay resistance.
Resistance
...
Taillight relay
ON-VEHICLE INSPECTION
1. TAIL LIGHT RELAY
Inspect relay resistance.
Resistance
...
Other materials:
VC Output Circuit
DESCRIPTION
The ECM constantly uses 5 V from the battery voltages supplied to the +B (BATT)
terminal to operate the
microprocessor. The ECM also provides this power to the sensors through the VC
output circuit.
When the VC circuit is short-circuited, the microprocessor in the ECM and
sens ...
Installation
1. INSTALL INSTRUMENT PANEL SAFETY PAD SUBASSEMBLY
Using a torque wrench, install the bolt <B>.
Torque: 20 N*m (204 kgf*cm, 14 ft.*lbf)
2. INSTALL SHIFT LEVER ASSEMBLY
Using a torque wrench, install the 4 bolts.
Torque: 21 N*m (214 kgf*cm, 12.6 ft.*lbf)
3. ...
Removal
1. PRECAUTION
CAUTION:
Be sure to read "PRECAUTION" thoroughly before
servicing.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to
prevent the airbag working.
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEE ...
