Toyota Sienna Service Manual: Power steering

Brake control

Sst Recommended tools HINT: Torx is a registered trademark of Textron Inc. EQUIPMENT LUBRICANT BRAKE SST RECOMMENDED TOOLS EQUIPMENT LUBRICANT PARKING BRAKE EQUIPMENT ...

Air conditioning

SST RECOMMENDED TOOLS HINT: Torx is a registered trademark of Textron Inc. EQUIPMENT LUBRICANT SUPPLEMENTAL RESTRAINT SYSTEM SST RECOMMENDED TOOLS HINT: Torx is a registered ...

Other materials:

Disassembly
1. REMOVE PROPELLER SHAFT ASSEMBLY (a) Put matchmarks on both the flanges. (b) Remove the 4 nuts, bolts and washers. 2. REMOVE INTERMEDIATE SHAFT (a) Put matchmarks on the propeller shaft subassembly and universal joint flange. NOTICE: Do not use a punch for the marks. (b) Using a ...

How to proceed with troubleshooting
1 VEHICLE BROUGHT TO WORKSHOP 2 CUSTOMER PROBLEM ANALYSIS 3 CHECK INITIAL CHECK FUNCTION 4 PROBLEM SYMPTOMS TABLE THE CORRESPONDING SYSTEM DOES NOT EXIST (Go to step 5) 5 BASED ON THE MALFUNCTION SYMPTOM, PERFORM THE TROUBLESHOOTING BELOW Operation check (C).  Terminals of ECU 6 ...

Installation
1. INSTALL STARTER ASSEMBLY (a) Install the starter with the 2 bolts. Torque: 37 N*m (380 kgf*cm, 26 ft.*lbf) for bolt (b) Connect the starter connector. (c) Install the terminal nut and cover the nut with the cap. Torque: 9.8 N*m (100 kgf*cm, 7 ft.*lbf) for nut 2. INSTALL NO. 1 ...