Toyota Sienna 2010-2025 Owners Manual: Using the Multimedia system

Voice settings

This screen is used for guidance for voice command systems setting. Adjust the voice guidance volume setting. Set the voice recognition prompts “High”, “Low” or “Off”. Set ...

Selecting the audio source

Switching between audio sources such as radio and CD are explained in this section. Changing audio source Press the “AUDIO” button to display the audio source selection screen. If the au ...

Other materials:

Cold Start Idle Air Control System Performance
DESCRIPTION This monitor will run when the engine is started at -10 to 50°C (14 to 122°F) of the engine coolant temperature. The DTC will set after the engine idling for 13 seconds (2 trip detection logic). The DTC is designed to monitor the idle air control at cold start. When the ...

Installation
1. INSTALL REAR NO. 2 SEAT ASSEMBLY  Lock the seat leg rear to the floor striker.  Lock the seat leg front to the floor striker.  Install the rear No. 2 seat assembly with the 8 bolts. Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf) NOTICE: Tighten the bolts in the order sho ...

VIN not Programmed or Mismatch - ECM / PCM
DESCRIPTION DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the Engine Control Module (ECM) or the input VIN is not accurate. Input the VIN with the intelligent tester. MONITOR STRATEGY TYPICAL ENABLING CONDITIONS TYPICAL MALFUNCTION THRESHOLDS ...