Toyota Sienna Service Manual: Back door outside garnish

Installation

1. INSTALL FRONT FENDER GARNISH Engage the 3 clips to install the front fender garnish. ...

Removal

1. REMOVE BACK DOOR CENTER GARNISH (See page ET-18) 2. REMOVE POWER BACK DOOR ROD (See page ED- 220) 3. REMOVE BACK DOOR LH SIDE GARNISH 4. REMOVE BACK DOOR RH SIDE GARNISH 5. REMOVE BACK DOOR ...

Other materials:

Gauges and meters
The displayed content may differ depending on the type of meter. Vehicles with monochrome display Vehicles with color display Tachometer Displays the engine speed in revolutions per minute Multi-information display Presents the driver with a variety of driving-related d ...

On-vehicle cleaning
1. INSPECT RADIATOR ASSEMBLY (a) Check that the radiator and condenser are not blocked with leaves, dirt, or insects. Clean the hose connections. If the fins are blocked, wash them with water or a steam cleaner. NOTICE: If the distance between the steam cleaner and core is ...

Dtc check / clear
1. DTC CHECK (NORMAL MODE) NOTICE: When the diagnostic system is switched from the normal mode to the check mode, all the DTCs and freeze frame data recorded in the normal mode will be erased. So before switching modes, always check the DTCs and freeze frame data, and note the ...