BMW 3 Series 2018-2022 Owners Manual: Driver assistance systems
- Manual Speed Limiter
- Cruise control
- Active Cruise Control with Stop & Go function ACC
- Concept, General information, Safety information
- Overview
- Switching on/off and interrupting cruise control
- Setting the speed
- Displays in the instrument cluster
- System limits
- Speed Limit Assist
- Steering and traffic jam assistant
- PDC Park Distance Control
- Concept, General information, Safety information
- Overview
- Depending on the equipment version: emergency brake function, Active PDC
- System limits
- Without Surround View: rearview camera
- Surround View with Parking Assistant Plus
- Parking Assistant
- Concept, General information, Safety information
- Overview
- Display on the Control Display
- Driving out of a parking space using the parking assistant
- System limits
- Cross traffic warning
xDrive
Concept
xDrive is the all-wheel-drive system of the vehicle.
The interaction of xDrive and other suspension
control systems, such as DSC Dynamic Stability
Control, further optimizes traction and driv ...
Manual Speed Limiter
Concept
The system can be used to set a speed limit, for
instance to prevent the vehicle from exceeding
speed limits.
General information
The system can limit the speed, starting at a
value of 20 mph/ ...
Other materials:
Canceling and resuming the constant speed control
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also canceled
when the brakes are applied.
Pushing the lever up resumes
the constant speed control.
Resuming is available when the
vehicle speed is more than approximately
25 mph (40 km/h). ...
Repair
1. STEERING OFF CENTER REPAIR PROCEDURE
(a) Inspect steering wheel off center.
(1) Apply masking tape to the top center of the
steering wheel and steering column upper
cover.
(2) Drive the vehicle in a straight line for 100
meters at a constant speed of 35 mph (56 km/
h), and hold the ...
Terminals of ECU
1. CHECK DRIVER SIDE J/B ASSEMBLY (MULTIPLEX NETWORK BODY ECU)
Disconnect the B6, 1C, 1K and 1L J/B connectors.
Measure the voltage and resistance according to
the value(s) in the table below.
HINT:
If the result is not as specified, there may be a
malfunction on the w ...
