Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Idle state

Concept

If the vehicle is in idle state, it is switched off. All power consumers are deactivated.

General information

The vehicle is in idle state prior to opening from the outside and after exiting and locking.

Safety information

Warning An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.

Before exiting, secure the vehicle against rolling.

In order to ensure that the vehicle is secured against rolling away, follow the following:

Warning Unattended children or animals in the vehicle can cause the vehicle to move and endanger themselves and traffic, for instance due to the following actions:

There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle.

Take the vehicle key with you when exiting and lock the vehicle.

Automatic idle state

The idle state is automatically established under the following conditions:

The idle state is not automatically established while a phone call is active.

Establishing idle state when opening the front doors

Via iDrive:

1. "CAR".

2. "Settings".

3. "Doors/Access".

4. "Turn off vehicle after opening door".

Manual idle state

To establish idle state in the vehicle after end of trip:

Operating state of the vehicle

Press and hold the button until the OFF indicator on the instrument cluster goes out.

Operating state of the vehicle
...

Standby state
Concept When standby state is switched on, most functions can be used while the vehicle is stationary. Desired settings can be adjusted. General information The vehicle is in the standby state after ...

Other materials:

Installation
1. INSTALL SPARK PLUG (a) Install the 6 spark plugs. Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf) 2. INSTALL IGNITION COIL ASSEMBLY (a) Install the 6 ignition coils with the 6 bolts. Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) (b) Connect the 6 ignition coil connectors. 3. INSTALL NO. 1 SUR ...

Installation
HINT:  Use the same procedures for the RH side and LH side.  The procedures listed below are for the LH side. 1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH  Install the curtain shield airbag assembly LH with the 13 bolts in the order shown in the illustration. Tor ...

Concept, General information, Safety information
Concept The system monitors tire inflation pressure in the four mounted tires. The system warns you if there is a loss of pressure in one or more tires. General information Sensors in the tire valves measure the tire inflation pressure and tire temperature. The system detects the mounted tires auto ...

В© 2011-2022 Copyright www.tsienna.net