BMW 3 Series 2018-2023 Owners Manual: LATCH child restraint fixing system
General information
LATCH: Lower Anchors and Tether for Children.
Pay attention to the specifications and the operating and safety information from the child restraint system manufacturer when selecting, installing, and using LATCH child restraint fixing systems.
Mounts for the lower LATCH anchors
General information
The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lbs/30 kg when the child is restrained by the internal harnesses.
Safety information
Warning If the LATCH child restraint fixing systems are not correctly engaged, the protective effect of the LATCH child restraint fixing system can be limited. There is a risk of injuries or danger to life. Make sure that the lower anchors are securely engaged and that the LATCH child restraint fixing system fits securely against the backrest.
Position
.png)
The corresponding symbol
shows the mounts for the lower
LATCH anchors.
Seats equipped with lower anchors are marked with a pair, (2), of LATCH symbols.
For vehicles equipped with a middle seat: It is not recommended to use the inner lower anchors of standard outer LATCH positions to fasten a child restraint system on the middle seat. Use the vehicle safety belt instead for the middle seat.
Before installing LATCH child restraint fixing systems
Pull the safety belt away from the area of the child restraint system.
Assembly of LATCH child restraint fixing systems
1. Install child restraint system, see manufacturer's information.
2. Ensure that both LATCH anchors are properly connected.
Installing child restraint
systems
General information
Pay attention to the specifications and the operating
and safety information of the child restraint
system manufacturer when selecting, installing,
and using child restraint system ...
Child restraint systems
with tether strap
Safety information
Warning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective effect
can be reduced. There is a risk of injury.
Make sure that the upper ...
Other materials:
Removal
CAUTION:
Wear safety gloves, because the sharp surfaces of the
seatback frame and seat adjuster may injure your
hand.
Work must be started more than 90 seconds after the
ignition switch is turned to the LOCK position and the
negative (-) terminal cable is disconnected from ...
Intended use
Heed the following when using the vehicle:
Owner's Manual.
Information on the vehicle. Do not remove
stickers.
Technical vehicle data.
The traffic, speed, and safety laws where the
vehicle is driven.
Vehicle documents and statutory documents.
Warranty
Your vehicle is technically configured ...
Short in Rear Curtain Shield Squib LH Circuit
DTC B1635/87 Short in Rear Curtain Shield Squib LH Circuit
DESCRIPTION
The rear curtain shield squib LH circuit consists of the center airbag sensor
assembly and the curtain
shield airbag assembly LH.
The circuit instructs the SRS to deploy when deployment conditions are met.
DTC B1635/87 ...
