Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Overview

Button in the vehicle

Safety

Intelligent Safety

Radar sensors

The radar sensors are located in the bumpers.

Safety

Front bumper.

Safety

Rear bumper.

Always keep the bumper in the area of the radar sensors clean and unobstructed.

Camera

Safety

The camera is installed near the interior mirror.

Keep the windshield in front of the interior mirror clean and clear.

Switching on/off

Switching on automatically

The side collision mitigation activates automatically after departure if the function was switched on at the end of the last trip.

Switching on/off manually

Press the button.

The menu for the Intelligent Safety system is displayed.

If all Intelligent Safety systems were switched off, all systems are now switched on.

"Configure INDIVIDUAL": depending on the equipment version, the Intelligent Safety systems can be individually configured. The individual settings are activated and stored for the driver profile currently used. As soon as a setting is changed on the menu, all settings of the menu are activated.

Press the button repeatedly.

The following settings are switched between: "ALL ON": all Intelligent Safety systems are switched on. Basic settings are activated for the subfunctions.

"INDIVIDUAL": the Intelligent Safety systems are switched on according to the individual settings.

Some Intelligent Safety systems cannot be individually switched off.

Press and hold this button.

All Intelligent Safety systems are switched off.

Button lights up green: all Intelligent Safety systems are switched on.

Button lights up orange: some Intelligent Safety systems are switched off or currently unavailable.

Button does not light up: all Intelligent Safety systems are switched off.

Setting the intensity of the steering wheel vibration

Via iDrive:

1. "CAR".

2. "Settings".

3. "Driver Assistance".

4. "Steering wheel feedback".

5. "Vibration intensity".

6. Select the desired setting.

The setting is applied to all Intelligent Safety systems and stored for the driver profile currently used.

Concept, General information, Safety information
Concept The system helps to avoid imminent side collisions. General information Four radar sensors in the bumpers monitor the space next to the vehicle from a minimum speed of up to approx. 130 mph/2 ...

Warning function
Light in the exterior mirror Acute warning If there is a risk of collision, the light in the exterior mirror flashes and the steering wheel vibrates. A Check Control message is displayed at the same ...

Other materials:

Intelligent Safety
Concept Intelligent Safety enables central operation of the driver assistance systems. General information Depending on how the vehicle is equipped, Intelligent Safety consists of one or more systems that can help prevent an imminent collision. Front collision mitigation. Evasion Assistant. Inte ...

Using a flatbed truck
If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45. Do not overly tighten the tie downs or the vehicle may be damaged. WARNINGObserve the following precautions. Failure to do so may result in death or serious injury. When tow ...

Transmitter ID1 Operation Stop
DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the air pressures of the tires. The measured values are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the ti ...

В© 2011-2022 Copyright www.tsienna.net