Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Renaming a driver profile

Countries in which ConnectedDrive is not available:

The name that was assigned when the driver profile was set up can be changed via iDrive:

1. "CAR".

2. "Driver profiles".

As an alternative for Steps 1 and 2, the profile image can be tapped in the top status bar.

3. Select driver profile.

4. "Settings".

5. Enter a profile name.

6. Select the symbol.

Selecting a profile picture

Countries in which ConnectedDrive is available: The profile image is transferred from the ConnectedDrive portal or the BMW Connected app.

Countries in which ConnectedDrive is not available: Via iDrive:

1. "CAR".

2. "Driver profiles".

3. Move the Controller to the right.

As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.

4. "Avatar".

5. Select the desired profile picture.

Deleting the driver profile

Via iDrive:

1. "CAR".

2. "Driver profiles".

3. Move the Controller to the right.

As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.

4. "Settings".

5. "Remove driver profile".

6. Select the desired driver profile.

7. "Delete now".

ConnectedDrive countries: If the driver profile was synchronized with a ConnectedDrive account, the stored data in the ConnectedDrive account will be retained.

System limits

A clear detection of the desired vehicle key may not be possible in the following cases, e.g.:

ConnectedDrive countries: A driver profile can only be created and synchronized with the ConnectedDrive account when cellular network reception is available.

The use of personal settings that are stored in the ConnectedDrive account in other vehicles is subject to technical limitations. For example, settings may be stored for a system that is not available, or available in a non-compatible version, in other vehicles.

Changing/canceling the recognition function
If another vehicle key or another digital key is to be assigned to a driver profile, the current assignment must be canceled first. Via iDrive: 1. "CAR". 2. "Driver profiles". 3. Move the Controlle ...

Connections
...

Other materials:

Check Control
Concept The Check Control system monitors functions in the vehicle and notifies you of malfunctions in the monitored systems. General information A Check Control message is displayed as a combination of indicator or warning lights and text messages in the instrument cluster and, if applicable, in th ...

Engine Coolant Temperature Circuit Range / Performance Problem
DESCRIPTION Refer to DTC P0115 (See page ES-133). MONITOR DESCRIPTION The ECT sensor is used to monitor the ECT. The ECT sensor has a built-in thermistor with a resistance that varies according to the temperature of the engine coolant. When the ECT becomes low, the resistance of the ...

Removal
1. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for 8-Passenger) HINT: Refer to the instructions for disassembly of the rear No. 1 seat assembly (for center seat).  Remove the bolt and rear seat 3 point type belt assembly. 2. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for 7-Pas ...

В© 2011-2022 Copyright www.tsienna.net