BMW 3 Series 2018-2022 Owners Manual: Seats, mirrors, and steering wheel
Manually adjustable seats
- Forward/backward
- Thigh support
- Seat tilt
- Backrest width
- Lumbar support
- Height
- Backrest tilt
Electrically adjustable seats
- Backrest width
- Forward/backward, height, seat tilt
- Backrest tilt
- Lumbar support
Adjusting the head restraint
Height
- To lower: press the button, arrow 1, and push the head restraint down.
- To raise: push the head restraint up.
After setting the height, make sure that the head restraint engages correctly.
For equipment specification with M sport seat: The height of the head restraints cannot be adjusted.
Distance to the back of the head
- Back: press the button and push the head restraint toward the rear.
- Forward: pull the head restraint toward the front.
Adjusting the exterior mirrors
- Adjusting
- Selecting a mirror, Automatic Curb Monitor
- Folding in and out
Adjusting the steering wheel
Manual steering wheel adjustment
1. Fold the lever down.
2. Move the steering wheel to the preferred height and angle to suit your seating position.
3. Fold the lever back up.
Memory function
Concept
The following settings can be stored and, if necessary, retrieved using the memory function:
- Seat position.
- Exterior mirror position.
- Height of the Head-up Display.
Storing
1. Set the desired position.
2. Press button on the door. The writing on the button lights up.
3. Press the desired button 1 or 2 at the door while the writing is lit. A signal sounds.
Calling up settings
Press the desired button 1 or 2.
Set-up and use
...
Infotainment
...
Other materials:
Operation check
1. NOTICE WHEN CHECKING THE FOLLOWING
Power door lock/unlock function:
The wireless door lock control function operates
only when the following 3 conditions are met:
No key is inserted in the ignition key cylinder.
All the doors are closed.
The power door lock sys ...
Lost Communication with Radar Sensor
DTC U1102 Lost Communication with Radar Sensor
DESCRIPTION
The laser sensor and distance control ECU transmit the data for general
vehicle control and diagnosis
function along the communication line. The distance control ECU determines the
curve radius information
based on signals from the s ...
ECM / PCM Internal Engine Off Timer Performance
DTC SUMMARY
DESCRIPTION
To ensure the accuracy of the EVAP (Evaporative Emission) monitor values, the
soak timer, which is built
into the ECM, measures 5 hours (+/- 15 minutes) from when the ignition switch is
turned off, before the
monitor is run. This allows the fuel to cool down, whic ...
