Toyota RAV4 manuals

BMW 3 Series 2018-2022 Owners Manual: Steptronic transmission

Engaging selector lever position D, N, R

On the road

With the driver's safety belt fastened, briefly push the selector lever in the desired direction, past a resistance point, if needed. The selector lever returns to the center position in each case.

To prevent the vehicle from creeping after you select a drive mode or reverse, maintain pressure on the brake pedal until you are ready to start.

A selector lever lock prevents the inadvertent shifting to selector lever position R or the inadvertent shifting from selector lever position P.

Engage selector lever position R only when the vehicle is stationary.

Releasing the selector lever lock

On the road

Press the button.

Engaging P

Engage selector lever position P only when the vehicle is stationary.

On the road

Press button P.

Steptronic transmission, Sport program and manual mode

On the road

Activate the Sport program/manual mode: Press the selector lever to the left from selector lever position D.

Manual mode:

End the sport program/manual mode: Push the selector lever to the right.

Drive-ready state
Switching on drive-ready state Depress the brake pedal. Press the Start/Stop button. Switching off drive-ready state Steptronic transmission: 1. Engage selector lever position P with the vehicle s ...

High beams, headlight flasher, turn signal
High beams, headlight flasher Push the lever forward or pull it backward. High beams on, arrow 1. The high beams light up when the low beams are switched on. High beams off/headlight flasher, ar ...

Other materials:

How to proceed with troubleshooting
HINT: *: Use the intelligent tester. 1 VEHICLE BROUGHT TO WORKSHOP 2 CUSTOMER PROBLEM ANALYSIS Confirm problem symptoms 3 CHECK MULTIPLEX COMMUNICATION SYSTEM* Check if the multiplex communication system DTC is output. HINT: The center airbag sensor assembly of this system is co ...

Registering a Bluetooth® audio player for the first time
To use the Bluetooth® Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the Bluetooth® Audio. For details about registering a Bluetooth® device Turn the Bluetooth® connection setting of your audio player on ...

CD cannot be Ejected
INSPECTION PROCEDURE 1 PRESS "EJECT" AND CHECK OPERATION Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected. OK: CD is ejected 2 REPLACE CD WITH ANOTHER AND RECHECK Insert another CD and check if it is ejected. OK: CD ...

© 2011-2022 Copyright www.tsienna.net