Toyota RAV4 manuals

Toyota Sienna Service Manual

Toyota Sienna Service Manual



Initialization
Items to initialize The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle. ...

Introduction
...

Other materials:

TRAC OFF Indicator Light does not Come ON
DESCRIPTION The skid control ECU is connected to the combination meter via CAN and multiplex communications. When the traction OFF switch is turned on, the TRAC OFF indicator light will come on (for 2WD model). WIRING DIAGRAM Refer to TRAC OFF Indicator Light Remains ON (See page BC-157). ...

For driver side
ON-VEHICLE INSPECTION 1. INSPECT AIR MIX CONTROL SERVO MOTOR (a) Remove the air mix control servo motor. (b) Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, then check that the lever turns to "COOL" side smoothly. (c) Connect ...

ECM
COMPONENTS REMOVAL 1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (a) Push the right side wall and then push the left wall to release the stoppers. (b) Pull the glove compartment door sub-assembly rearward to remove it. 2. REMOVE NO. 2 INSTRUMENT PANEL BOX (a) Disengage the 2 claws ...

© 2011-2024 Copyright www.tsienna.net